Dunk the cap in hot water to soften the plastic, twist it off, and then clip off the little locking tabs with a pair of nail clippers. Your previously locked Wet Jet reservoir is now a plain old refillable bottle you can refill with the cleaning solution of your choice.

In respect to this, can you put your own cleaner in Swiffer Wet Jet?

Fill the container with your cleaner and water. Instead of buying their disposable cleaning pads, use a microfibre cloth. It will velcro right on the bottom just like the original Swiffer pads but it does a better job of cleaning and you can just toss them in the washing machine to reuse over and over.

One may also ask, how do you fix a Swiffer wet jet that won't spray? Unclogging a Swiffer Wet Jet nozzle is a simple process that will have the unit working properly.

  1. Push the button on the front of the mop body where the cleaner bottle inserts into the Swiffer Wet Jet.
  2. Fill an 8-ounce glass ¼ full with white vinegar.
  3. Insert the tip of a toothpick into the nozzle hole as far as possible.

Besides, can you put Pine Sol in a Swiffer Wet Jet?

Yes, you CAN refill the Swiffer mop bottle. I boiled water. Added Pine Sol and water and had clean floors in minutes.

Is Swiffer Wet Jet worth it?

While you'll need to stock up on more cleaning pads and solution, the unbeatable convenience of the Swiffer WetJet Floor Spray Mop makes it worth the expense.

Related Question Answers

What is in Swiffer WetJet solution?

The nine ingredients in Swiffer Wet Jet solution are purified water, ethyl alcohol, Polypropylene Glycol N-Butyl Ether, Alkyl Polyglucoside, Didecyl Dimethyl Ammonium Chloride, Chlorhexidine Diacetate, Fragrance, Silicone Emulsion and Polyethyleneimine. Swiffer is an alternative to a traditional mop.

Does Swiffer disinfect?

Scentiva® Disinfecting Wet Mopping Cloths. Now, clean and disinfect in one step. Clorox® Scentiva® Disinfecting Wet Mopping Cloths fit Swiffer® Sweeper and other mopping tools to take on your dirtiest floors. Ultra-textured cloths trap 4x more particles, dirt and hair*, and will leave your home smelling amazing.

How do you open the batteries on a Swiffer Wet Jet?

To access the batteries, you must remove the Swiffer cleaner. To do so, hold the Swiffer upside down. Push the large button between the cleaner and the Swiffer pole. Pull down firmly to remove the cleaner.

Do you have to sweep before using a Swiffer Wet Jet?

You can use the Swiffer WetJet on just about any floor type. Another thing to keep in mind is before you use your Swiffer, either vacuum or use the Swiffer Dry or Swiffer Sweep and Trap so you can pick up any lingering dust or pet hair. It will help clean your floor thoroughly.

Is Swiffer toxic?

Simply put, Swiffer WetJet is safe to use around pets, as long as you follow the label directions. The product's pads could cause a gastrointestinal blockage if eaten, and a large amount of the cleaning solution could lead to toxicity, but most pets should be smart enough to avoid guzzling the solution.

How do you change the Swiffer WetJet bottle?

How to Remove an Empty Bottle From a Swiffer WetJet
  1. Grasp the cleaner bottle with one hand.
  2. With the other hand, press down on the lavender release button located on the pole at the top of the inverted cleaner bottle.
  3. Lift the empty cleaning solution bottle and discard.

How does the Swiffer WetJet work?

Swiffer WetJet Wood Floor Spray Mop gives you a great clean on virtually any floor in your home. With a unique dual-nozzle sprayer, this all-in-one mopping system breaks up and dissolves tough messes for a powerful clean.

How do you make reusable Swiffer pads?

Instructions
  1. Pour the distilled water and vinegar into the empty container or Ziploc bag.
  2. Next, place your clean rags in, one at a time into the container.
  3. Store with the lid on, or if using the ziploc bag, with the top zipped.
  4. To use, attach a rag to your Swiffer mop, just like you would the other wet pads.

How do you use a Swiffer?

The sweeper is meant to replace a broom, dustpan and mop.
  1. Remove a dry cloth from the package.
  2. Place the Swiffer Sweeper cleaning head in the center of the cloth.
  3. Push the Swiffer Sweeper across the floor to pick up dust and dirt.
  4. Remove the dry cloth from the cleaning head.

Why is my Swiffer Wet Jet leaking?

The reason being that you have to turn the mop upseide down in order to store it. If you don't the solution that's on the wet pad will leak all over the floor and down the mop handle while it's upside down.

What is Pine Sol Good For?

A favorite household cleaner since the 1920s, Pine-Sol is a multipurpose cleaner made with pine oil. Pine-Sol isn't corrosive like bleach and also leaves behind a fresh, pine scent. You can use diluted Pine-Sol to clean hardwood, linoleum, tile, counter tops and several other surfaces. Pine-Sol can be harmful to pets.

Does Swiffer Wet Jet streak?

The Swiffer WetJet cleaning solution leaves white cloudy streaks on most wood floors. Even if you try and pick up the cleaning solution or if you just let the cleaning solution dry on your floors, the white streaks will almost always occur.

How do you use Pinesol?

Follow these steps:
  1. step1. Sweep or vacuum the floor with a hard floor attachment to remove loose dirt.
  2. step2. Add ¼ cup Pine-Sol® to a bucket with about a gallon of water.
  3. step3. Mop your floor with the mixture.
  4. step4. Scrub stains and shoe marks with full-strength Pine-Sol®.
  5. step5. Rinse with water.